Greenhouse Shelf

The greenhouse is all set up, but it needed a place for plants besides the floor. The greenhouse building video showed a way to install some shelves, so I pretty much followed their instructions. It was not a huge project; it took about an afternoon of work.

I used a 2x2 as the front edge support for the shelf. The center brace that is part of the greenhouse wall was be the back support. In this picture you can see the back brace (with metal L bracket) that will hold up the back of the shelf. I used a bracket that I could slide over the redwood brace because i didn't want to put holes in the pretty redwood.
To make the shelf itself, I cut poplar dimensional lumber into lengths and set them across the supports.

Some of them had to be custom cut to fit. I cut notches in the back of the slats to wrap then around the wall studs (you can see why I needed to do that in this picture). I couldn't just cut them short because they wouldn't have anything supporting them in the back.


Here is a closer picture of the slats. You can see where I cut them to fit around the wall studs. The colors in the wood I used for the slats were really beautiful. It's not as rich as the redwood of the greenhouse itself, but the colors definitely work. Wood is gorgeous.


Here is how the shelf looks from across the greenhouse. You can see my little space heater in there keeping it above freezing. The heater doesn't have to run all the time--it has an "anti-freeze" setting, which just keeps the temp above 35 in there. During the day it stays cozy warm just from the sun, but it needs a little help from the heater at night. You can also see the 2x2 legs that i put on the shelf for support. Don't want my little plantalonas to come tumbling down!


I nailed the slats it just along the front edge (for now) to hold them in place. I didn't want to put a million holes in the redwood, which is why i didn't nail the back edge down, but I may change that later if the slats are not secure enough.

Look how happy the little plants look basking in the winter sun! All warm and cozy in the greenhouse :)

Greenhouse First Half

The greenhouse retaining wall has been a lot of work, so it has taken a while to get the area ready to hold up the greenhouse. The part that took the most work was backfilling behind the wall. It required a lot more dirt than I had available, so I dug a giant hole in the very back of the yard to get more dirt. I loaded about 100 wheelbarrows full into the area behind the wall! It took many days to complete this process; moving the wheelbarrow up and down the hill in our yard is exhausting, and we've had very bad weather recently, including snow!
Finally, this weekend was forecast to be sunny and in the 50s. The retaining wall was build, and the backfilled dirt was all packed down to within an inch of its life. Time to build the greenhouse!

I spent a lot of time preparing and leveling the base. I had already started doing this part of the work a few days ago, but today was the day to make it perfect. It doesn't have to be exactly, perfectly level, but I didn't want it to look wonky and it obviously had to be square.Once I had the base exactly where I wanted it, I realized the bushes on both sides of the greenhouse would have to be cut back to make room for the walls. The weigela behind the greenhouse got a hard trim, but it shouldn't have any trouble next spring (most of the bush was still there). The lilac bush right near the future greenhouse door location will probably have to be moved (or cut back to the ground). It's a giant tree right now and waaaay too big.

Once all the bushes were trimmed, we decided we needed some sort of gutter along the back between the house and the greenhouse, so water didn't end up trapped there. So off I went to the hardware store. They didn't have small lengths of gutter, so I bought and modified a black drainpipe.I used silicone adhesive to fill the gap between the gutter and the house. It's not pretty, but once the greenhouse is built it will be invisible.The best thing about the black drain pipe is that I was able to bend the end of it so that the water will spill off the retaining wall and away from the house. Eventually I will probably hook the end up to a water barrel for garden watering needs.Once the gutter was in place, we scrubbed the mildew off the siding and then it was time for greenhouse walls! We worked quickly because the light was fading (all the prep work took forever!) so I don't have many pictures of the process. I will tell you that the instructions don't come in print form, they are on a CD in 30-minute-video form! I watched it all the way through a few days ago to prepare, but I couldn't remember everything, so we're outside with my laptop, watching snippets of video and screwing wood together. Hilarious!

Here is how it looks from a little farther away.

The walls are made out of two layers of plastic with little extra plastic to support it. It's light, but the wood is heavy. Overall it seems pretty sturdy, and free bonus: it provides a little more privacy on the patio!

Stay tuned for part 2 tomorrow!

Halloween!

Happy Halloween!

Here are the decorations I put on our house. They are pretty minimal, but I think they make an impact. At least our neighbors know the house isn't foreclosed any more!

All I did was cut monsters out of newspaper and tape them to the windows. In the picture you can see through the newspaper a lot, so I actually put a second layer on all the monsters to make them less translucent.
They still looked like newspaper, but that's ok. Baby steps. The hubby mentioned that this is the most outwardly decorated our home has ever been. And that is a sad truth (I blame graduate school!).

From inside, they looked pretty sloppy:
But I will probably use them again next year anyway. I'm fond of my little monsters :)

Safe and candyful halloween to all!

Painting the Upstairs

One project we wanted to finish before the carpet arrived was the upstairs painting. We actually finished this project prior to painting the subfloors blue, but I'm just now getting to blogging about it. Better late than never. You've even already seen the 'after' pictures with the carpet installed. But here the pictures are anyway.

We wanted to finish this project up before carpet so that I wouldn't have to worry about paint getting on the carpet later.

The original wall colors upstairs weren't my favorite but they weren't that bad. However, we were concerned the bad smell of the house may have settled into the paint on the walls. Repainting the walls will seal any bad smell into the wall. Anyone who has lived in a house that belonged to a smoker will tell you that the best way to get rid of that lingering smoke smell is to paint the walls.

I used a 5 gallon bucket of Valspar in "Pale Blossom" eggshell. It's basically a beige version of white. It's a great neutral. Since I was planning on painting pretty much the whole upstairs the same color, I figured it should be a very neutral color. I don't want to be sick of it later.


I was really pleased with the coverage I got from this paint. This picture shows how well the paint covered this medium purple on the very first coat:


That purple room did require a second coat, but since the other rooms were already light beige colors they only needed one coat plus touch-ups here and there.

The whole place looked whitewhite once I finished since the trim, walls, and floors were all about the same color. It was a huge improvement. It looked so clean! Once I painted the trim with ultra white, the walls settled into the background a little more.

Here is Heathrow offering his approval.

One bedroom ended up painted blue-gray, because I was worried I was running out of Pale Blossom paint. I got the blue paint from the "oops" bin so it was a bit of a risk, but it ended up being a soft blue-gray. It's lovely in person; I got lucky!


The room was originally yellow. . .
Yellow no more! The toilet was uninstalled from the bathroom and living in this room because I was preparing to tile at the same time. So busy!!

Heathrow is keeping an eye on the other important tools while I work.

Here is one bedroom after being painted and having carpet installed. You can see I missed a spot--haha, oops!

What do you think of the transformation? Do you like the super-neutral? I'm on a beige kick these days, I just want beige and white everywhere. What are your favorite colors this season?

New Carpet!

Finally the big day for carpet has arrived! (This post is actually late, the real big day was the same day as Greenhouse Day).

The carpet installers arrived at 7:30am, which was before we were awake. They had called at 6:45am saying they would be there soon, but we both slept right through it! We were happy to see them anyway. While they brought in their supplies, we rushed around and uninstalled the ugly metal doors on all the closets so the carpet would continue into the closet without any spaces.

They installed the pad in about 45 minutes--so fast!

They had to install new tack strip in a few places. They didn't stretch it over the tack strips, just stapled it down next to the tack strip.

Then in came the carpet! They unrolled some so I could see it. It looked great in the house!! The color was perfect--not too light or too dark--and the whole thing felt so soft!
The carpet installers were great, they finished in about 5 hours. I made them lunch. They were funny guys, we chatted while they ate, but they didn't pause for long. They get paid by the job, so they try to finish each job as fast as possible, without mistakes. They did forget to cut the carpet out for one of the vents, but that was the only thing that wasn't perfect. It was funny because I walked into the room and thought to myself "isn't this room heated? I swear there was a vent in here..." and then i found the squishy spot with my foot. It was super easy to cut the carpet for it though, so now that room is heated again. Haha :P

Doesn't it look so cushy??
Now we can start really living in the rooms upstairs. We will be moving the bed up and sleeping in the master bedroom right away! Hooray!

Floor Part IV

Since the oil paint on the floor was so stinky (and the chemical smell did not go away), we tried putting another layer of regular low-VOC paint over it. Lovely baby blue from the "oops" bin at the local Orange hardware store.


And some ugly purple-brown from the "oops" bin:

Within a few days, the smell in the house was 100% better. I highly recommend this method to anyone with nastified subfloors: bleach, primer, then low- or no-VOC paint to seal in the primer smell. Even after several days of rain, the house doesn't start smelling like pee or chemicals at all. Hooray! Next stop: carpet!

Digging a Hole to Fill It Back In

My little greenhouse needs a sturdy, level place to set her feet. Today I'm preparing that space for her!

There is a fairly steep slope right in the spot I hope to have the greenhouse (in the picture, it's the area to the left of the brick patio), so I'm building a small retaining wall to hold the soil in place. All those pots are full of dahlias, but they are a story for another day. I did plenty of research online to make sure I understood the wall-building process. Then I followed these steps:

Step 1:
Dig a hole in a straight line, with an approximately level bottom. (Forgot to take this picture) Tamp down the soil in the bottom of the hole. You can use a hand tamper, but since i didn't have one, I used a brick like a heathen.

Step 2:
Fill the hole part-way with special gravel that is designed for this purpose. The special gravel tamps together well and is a nice sturdy base. This layer needs to be pretty much level, but don't kill yourself leveling it. Tamp down the gravel (again, hand tamper or brick.)


Step 3: On top of the gravel, add special leveling sand. As before, special sand is important because when you tamp it, the grains lock into place and don't shift around. Regular sand is shifty, hence the term "shifting sands". This level must be level.


Step 4 - 65:
Apply blocks. Level blocks side-to-side and also front-to-back. You don't want a wall that is lean-y in any direction. If a block needs adjustment, pound on it with a rubber mallet. If you don't have one, put a piece of wood on top of the block and hit it with a brick. Thats what I did. Once the blocks are all in place, backfill behind the wall with soil.


I used wall blocks that have a lip on the back, so they don't need mortar. This is much more DIY-friendly than cinder blocks, which must be mortared. The lip on the back of the block slides up against the back of the block below, so as the soil behind the wall pushes forward on the blocks, they lock more tightly into place.

I purchased 60 blocks for my wall, which ended up being 3 blocks short of done. Shoot! I will buy those tomorrow and finish up. Here is how the wall looks currently:

It looks really tall in the picture, but in reality it's only about 2 feet. Tomorrow I will add the last 3 blocks and continue backfilling. I'm really pleased with the wall. It feels sturdy, is very level, and looks pretty good. There is just enough room between the wall and the fence for me to walk. Now I just need to move several hundred lbs of soil for backfill and I'm ready to install the greenhouse!!